← Back to the recipe

Ingredients and steps on one page. Print it, or choose “Save as PDF” in the print dialog.

Sekai Gohan

Rocky Road: Australian Chocolate Slab with Macadamias and Marshmallows

Servings 20 servings

Squares of finished rocky road, cut and seen from above
Steps with photos

Ingredients

Ingredient Amount Role
Dark chocolate, 70% cocoa 18 oz (500 g) Binds everything and gives the bitter backbone
Whole macadamia nuts ¾ cup Buttery crunch and richness
Marshmallows 7 oz (200 g), about 1½ cups Soft chew and sweetness
Glacé cherries ½ cup Red color and a sharp-sweet note
Shredded coconut ½ cup Aroma and texture

Steps

  1. 1Line the tin and scatter the fillings

    Line the tin with baking paper so the slab can be lifted out later. Scatter the macadamias, marshmallows, glacé cherries and coconut over the base. Spread them so the colors mix and no one ingredient clumps in a corner. The fillings are ready when they cover the base in a single bumpy layer, with paper showing only in small gaps.

  2. 2Melt the chocolate over water

    Break the chocolate into a heatproof bowl and set it over a saucepan of barely simmering water, with the base of the bowl clear of the water. Stir with a spatula as it melts. Keep every drop of water and steam out of the bowl; water makes melted chocolate thicken and turn grainy. The chocolate is ready when it is completely smooth and glossy, with no lumps, and falls from the spatula in a ribbon.

    Hot bowl and steam

    The bowl and the steam from the pan are hot. Lift the bowl with a dry cloth or oven mitt, and wipe the base dry before you tip it over the tin.

  3. 3Pour the chocolate over the fillings

    Pour the chocolate over the fillings as evenly as you can, moving along the tin instead of tipping it all into one spot. Scrape the bowl clean with the spatula. Gently shake the tin from side to side so the chocolate runs into the gaps and the surface levels out. Stop when the chocolate has settled into an even layer around all the pieces.

    Shake, don't stir

    Stirring the fillings into the chocolate breaks the marshmallows and muddies the colors. A gentle shake of the tin gets the chocolate into the gaps and keeps the red, white and brown pattern clean.

  4. 4Leave it at room temperature until fully set

    Set the tin down on a level counter and leave it alone. Let the chocolate set completely at room temperature. Moving the tin while the chocolate is still soft disturbs the surface. It is ready when the whole slab is firm all the way through.

  5. 5Lift out and cut into squares

    Lift the slab out of the tin by the baking paper and set it on a cutting board. Cut it into squares with a large knife, pressing straight down through the nuts in firm strokes. Peel each square away from the paper. The cut faces show the red cherries, white marshmallow and brown nuts set in the chocolate.